With only one visible, continuous and unobstructed surface, Emyflow is the shower channel particularly easy to clean and maintain as it offers also a large and direct access to the trap from the central removable grid.

Emyflow is available in the following lengths

• 400 mm
• 600 mm
• 800 mm
• 1.000 mm

and can be combined with two different grid models.

The trap and the rest of the channel structure that are built-in into the screed are in ABS while the exposed parts of the cover and central grid are in AISI 316 stainless steel, an excellent quality particularly resistant against wear and corrosion by chemical agents or brackish water.

It is supplied with a three exits DN40 ABS Trap ( the two lateral ones are to be opened according to the positioning in the plant). For installation with larger diameter pipes, included in the package there is a DN50 jointed outlet to be glued at the central exit through special glue TCF (included also in the package).

As for the other shower channels of OMP TEA floor range, also Emyflow is supplied with kit for the drain perimeter waterproofing that secures the contact area between the shower channel and the screed and serves as a basis for the completion of the insulation layer to be made by cement glues waterproofing or technical fabrics.

For more information about thin bed waterproofing and the dedicated products of OMP TEA , we invite to visit the installation page.

In addition to the waterproofing kit in the package you can also find:

• supports to ease the installation and allow a handy adjustment adapting to any roughness of the surface
• everything you need for siphoning (including hairs-stop grids) 
• cover grid
• instruction sheet

The dimensions of Emyflow are:

• only 65 mm of space under the floor

• height adjustable floor covering from a minimum of 15 mm to a maximum of 35 mm

Available range

Main features

1. easy to clean and maintain as it consists of a single surface

2. AISI 316 steel grid and exposed surface

3. direct access to the extractable trap

4. reduced space under the floor, only 70 mm

5. height adjustable for tiles thickness from 15 to 35 mm

6. ABS Trap with two additional DN40 ABS exits

7. ABS DN50 jointed outlet 

8. Thin bed system perimetric waterproofing 

9. Adjustable supports to ease the installation

Contents of the box

• 1 ✕ removable AISI 316 stainless steel grid (2 models)
• 1 ✕ AISI 316 stainless steel cover (4 lenghts)
• 1 ✕ ABS Grid holder
• 1 ✕ ABS Trap with 3 DN40 exits (of which 2 closed)
• 1 ✕ ABS DN50 jointed outlet 
• 1 ✕ closure cap of the central outlet if not used
• 1 ✕ TCF glue to glue the jointed outlet or cap 
• 4 ✕ Adjustable supports to ease the installation (feet)
• 1 ✕ siphon kit (2 pcs  + 2 hairs stop grids)
• 1 ✕ kit for the perimeter waterproofing of the drain
• 1 ✕ instruction sheet