Squid
It is the space-saving trap for extremely compact washbasins and bathroom furniture.
The accurate study of the dimensions in the new bathroom conception has assumed great importance, especially in the engineering parts selection. The versatility and the small sizes are plus that can make the difference.
To meet these needs, Squid, the ABS space-saving trap, with its minimal wall space, only 43 mm, is ideal for bathroom furniture that need a lot of usable space.
The additional features of Squid have been carefully studied to adapt it to the space-saving needs of modern and functional bathroom furniture: a minimum encumbrance of the inlet pipe, a wide adjustment range (the two tubes L. 250 mm can be cut), water seal in conformity with European standards (50 mm), the easy maintenance through the inspection cap on the bottom and the possibility of fixing the trap to the wall using specific slots for screws.
Squid also has an additional inlet for direct connection to the washbasin overflow or, alternatively, for the connection of the drain of washing machines and dryers.
To complete the range is also available the version for two bowls washbasin (art. 1652.500.5).
Standard Model (1650 series)
In the standard model, Squid does not have the waste included and has the following minimum dimensions:
- wall encumbrance, with direct connection to the wall, in total only 43 mm
- under waste encumbrance, only 48 mm in total from the waste to the lower limit of the horizontal inlet pipe
In the image, the trap is shown in combination with clicker waste 7532.310.5, in this case in order to calculate the total Under waste encumbrance you must add 30 mm referring to the counter nut of the clicker.
| ARTICLE | FEATURES |
|---|---|
| 1650.500.5 | Without waste, without overflow connection, without washing machine/dryer connection fitting |
| 1650.506.5 | Without waste, with overflow connection, without washing machine/dryer connection fitting |
| 1650.503.5 | Without waste, without overflow connection, with washing machine/dryer connection fitting |
| 1652.500.5 | For two bowls washbasin, without waste, overflow connection or washing machine/dryer connection fitting |
Model with waste (1657 series)
The model with waste, includes in the box the item 7532.316.5 (c.p. brass click clack waste) and has the following minimum dimensions:
- wall encumbrance, with direct connection to the wall, in total only 43 mm
- under waste encumbrance, in total only 55 mm from the lower limit of the basin (or basin top) to that of the horizontal inlet pipe including ring nuts
The example image shows the total counter-wall and under-basin dimensions of the entire drain set, trap + waste.
| ARTICLE | FEATURES |
|---|---|
| 1657.500.5 | With waste, without overflow connection, without washing machine/dryer connection fitting |
| 1657.506.5 | With waste, with overflow connection, without washing machine/dryer connection fitting |
Accessories available
- art. 247.301.0 – overflow connection L.540 max with ABS c.p. overflow grid for holes ø30 (already included in art. 1650.506.5 and 1657.506.5)
- art. 2111.110.4 – to be used individually without the condensate / dryer connection fitting or in combination with it, it precludes the connection to the overflow with additional conical gasket specific for Squid (already included in art. 1650.503.5)
- art. 2111.105.4 – 1”×ø10/14 removable condensate and dryer connection fitting supplied with closed inlets (already included in art. 1650.503.5)
- art. 2111.103.5 – washing machine connection fitting 1”¼×ø21 removable and closable, to be used in order not to preclude the connection to the overflow